Logo
Ham Menu
Building & Construction
Electricals, Electronics & IT
Industrial Supplies & Engineered Products
Machinery & Mechanical Equipment
Packaging, Printing & Office Supplies
All Categories
Foam Inductor
6 results
Price Available
Foam Inductor
6 results
Price Available
Sort By
Relevance
Discount
Price Low to High
Price High to Low
SOLESAFE SSS-FFE-1851 Stainless Steel Foam Inductor_0
Request bulk pricing
SUPER SAFETY SERVICES 4.5
location Mumbai, MH
Protecto Fire IN 225 Aluminium Foam Inductor_0
Request bulk pricing
PROTECTO FIRE SAFETY INDUSTRIES
location Ahmedabad, GJ
Protecto Fire IN 225 Aluminium Foam Inductor_0
Request bulk pricing
PROTECTO FIRE SAFETY INDUSTRIES
location Ahmedabad, GJ
Protecto Fire IN 450 Aluminium Foam Inductor_0
Request bulk pricing
PROTECTO FIRE SAFETY INDUSTRIES
location Ahmedabad, GJ
Protecto Fire IN 450 Aluminium Foam Inductor_0
Request bulk pricing
PROTECTO FIRE SAFETY INDUSTRIES
location Ahmedabad, GJ
Protecto Fire IN 600 Aluminium Foam Inductor_0
Request bulk pricing
PROTECTO FIRE SAFETY INDUSTRIES
location Ahmedabad, GJ

Foam Inductor

A foam inductor draws foam concentrate into a water stream and mixes the two in the right ratio before the mixture reaches the branch pipe or foam maker. It sits between the pump or hydrant line and the foam delivery equipment, and it is one of the parts that decides whether a foam-based fire suppression system actually produces usable foam. 

On SuFin, foam inductors from brands such as Protecto Fire and SOLESAFE are available in aluminium and stainless steel, in sizes from 80 mm to 100 NB, sourced from sellers in Ahmedabad and Mumbai.

What is a Foam Inductor?

A foam inductor, also called a foam proportioner, is a fitting that uses the Venturi effect to pull foam concentrate out of a tank and blend it into pressurised water. Water entering the inductor speeds up as it passes through a narrow throat, and this creates a pressure drop that draws in concentrate through a side connection. The blended stream then moves on to a foam maker or branch pipe, where air is added to turn the liquid into finished foam. 

Without a properly sized inductor, a system will push out plain water or an inconsistent mix that will not smother a fuel fire. Filter options based on size, nominal flow, material and operating pressure on this page and choose the foam inductor fitting your requirements.

Working Principle of a Foam Inductor

The inductor works on a simple pressure difference, and below is how it becomes reliable without any moving parts or power supply.

  • Water enters the inductor body and passes through a constricted throat section.
  • The throat raises the velocity of the water and lowers its pressure at that point.
  • The drop in pressure pulls foam concentrate up through a hose or pipe connected to the inductor's suction port.
  • Concentrate and water combine in a fixed ratio, commonly 3% or 6%, as they exit the inductor.
  • The proportioned mixture travels to the foam maker or branch pipe, where it aerates into foam.
  • Flow and pressure at the inlet must stay within the inductor's rated range for the ratio to hold steady.

Types of Foam Inductors Used in Fire Protection Systems

Foam inductors are generally grouped by how they are fitted into a system, and here are a few types at SuFin Limited.

  • Inline Foam Inductor

An inline foam inductor is fitted directly into a straight run of pipework between the water source and the foam maker. It has no moving parts and works purely on the venturi effect described above. This type suits permanent installations where the pipe layout is already fixed, such as a tank farm or a factory foam system.

  • Fixed Inline Foam Inductor

A fixed inline foam inductor is bolted or flanged into position as part of a permanent foam system rather than connected for temporary use. It is chosen when a facility runs the same foam concentrate and flow rate on a routine basis. Protecto Fire's IN series and SOLESAFE's SSS-FFE range on SuFin are supplied in this fixed configuration.

  • Portable Foam Inductor

A portable foam inductor connects between a hose line and a branch pipe or foam monitor at the point of use. Firefighting crews carry it to wherever a foam attack is needed and disconnect it once the job is done. This type is common with fire tenders, mobile foam units and sites where a fixed system is not practical.

Key Features of Foam Inductors

Across the foam inductors listed on SuFin, here are the key features:

  • Body material in aluminium or stainless steel, chosen for weight or corrosion resistance.
  • Fixed flow ratings such as 225, 450, 550 and 600 LPM.
  • Nominal sizes include 80 mm and 100 NB to match hose and pipe couplings.
  • Operating pressure ratings of 5, 7 and 8 bar.
  • A dedicated suction port for the foam concentrate line.
  • No moving parts, which keeps maintenance to periodic cleaning and seal checks.

Applications of Foam Inductors Across Industries

Foam inductors are used wherever a fire risk involves flammable liquids and water alone will not put it out.

  • Oil and gas storage terminals, where tank fires need a steady foam blanket.
  • Petrochemical and chemical plants with process areas holding flammable solvents.
  • Power plants, particularly around transformers and fuel storage.
  • Airports and aircraft hangars, where aviation fuel spills call for rapid foam cover.
  • Warehouses storing flammable or combustible goods.
  • Fire tenders and mobile foam units used by municipal and industrial fire brigades.

How to Select the Right Foam Inductor

Getting the specification right at the ordering stage avoids a mismatch once the inductor is fitted on site. Therefore, here are a few factors: 

  • Match the flow rate to your pump or hydrant output, since an undersized inductor restricts the line and an oversized one will not draw concentrate properly.
  • Check the operating pressure range and confirm it aligns with the pressure your pump delivers at the inductor's location.
  • Confirm compatibility with your foam concentrate, since not every inductor is rated for both 3% and 6% concentrates.
  • Consider the application, since a fixed installation calls for a flanged or threaded inline unit while a mobile crew needs a portable model.
  • Check the body material against the site conditions, choosing stainless steel where corrosion or coastal exposure is a concern.
  • Confirm the nominal size matches your existing pipework or hose couplings to avoid extra adaptors.

Foam Inductor Price in India

The foam inductor price depends mainly on body material, flow rating, pressure rating and brand.

What Moves the Price

Why It Matters

Body material

Stainless steel costs more than aluminium but resists corrosion better.

Flow rating

Higher LPM models such as 600 LPM use more material than a 225 LPM unit.

Operating pressure

Units rated for 7 or 8 bar are built to tighter tolerances than 5 bar units.

Brand

Established fire safety brands are usually priced above lesser-known ones.

Order quantity

Bulk orders generally bring the per-unit rate down.

Most listings on our platform are marked "Request bulk pricing," and the foam inductor price in India for your project depends on your exact model, material, and quantity. Share these details to get an accurate quote.

Buy Foam Inductor Online from SuFin

Fire safety contractors, EPC firms, and industrial buyers can buy foam inductor online through SuFin by filtering the category by brand, material, flow rate, nominal size, and operating pressure. Once you find a match, click Request Quote for Bulk and share your quantity, delivery location, and PIN code. Sellers on SuFin respond with quotes that you can compare before confirming an order, and the process works the same whether you need one unit for a single system or several units for a multi-site rollout.

Why Buy Foam Inductors from SuFin?

SuFin brings sellers such as Protecto Fire Safety Industries and Super Safety Services onto one platform, so comparing foam inductors does not mean contacting each supplier separately. You can filter by MOQ, price per piece, and seller location to find a fit for your project and budget. Business orders come with a GST invoice, and eligible buyers can apply for trade credit through the platform's lending partners. Whether you want to buy foam inductor in bulk for a project pipeline or source a single unit for a repair, SuFin keeps the process on one screen from search to quote.

FAQs

Q1. What is a foam inductor?

A foam inductor is a fitting used in foam-based fire protection systems to mix foam concentrate into a water stream at a set ratio. It sits between the water supply and the foam maker or branch pipe. Without it, the system would deliver plain water instead of firefighting foam.

Q2. How does a foam inductor work?

It uses the venturi effect, where water speeds up through a narrow throat and creates a pressure drop. This drop pulls foam concentrate in through a suction port connected to the concentrate tank. The two combine in a fixed ratio as the mixture continues to the foam maker.

Q3. Where are foam inductors commonly used?

They are used in oil and gas terminals, petrochemical plants, power stations, airports and warehouses storing flammable goods. Fire tenders and mobile foam units also carry portable inductors. Any site with a flammable liquid fire risk is a likely application.

Q4. What is the difference between a foam inductor and a foam proportioner?

The two terms generally refer to the same device, and "proportioner" is simply an alternate name used in some standards and product literature. Both describe a fitting that blends foam concentrate into water at a set ratio. The choice of term often comes down to regional convention rather than a difference in function.

Q5. How do I choose the right foam inductor?

Start with your required flow rate and the pressure your pump or hydrant delivers, then check that the inductor is rated for your foam concentrate percentage. Also match the nominal size to your existing pipework and decide between a fixed inline unit and a portable one.

Q6. What factors affect foam inductor price in India?

Body material, flow rating, operating pressure, and brand are the main factors, with stainless steel and higher flow models generally costing more. Order quantity also plays a role, since bulk orders usually bring down the per-unit rate. Since most listings are quote-based, the final price depends on your exact specification.

Q7. Can I buy foam inductors online from SuFin?

Yes, you can browse the category, filter by brand, material, flow rate and pressure rating and use Request Quote for Bulk to get pricing from sellers on SuFin. This makes it possible to buy foam inductor without contacting multiple suppliers individually. The best foam inductor for your site will depend on matching these filters to your system's requirements.

Q8. Does SuFin offer foam inductors for bulk orders?

Yes, sellers on our platform quote for foam inductor wholesale orders based on the quantity, delivery location, and specification you share. This suits contractors and distributors handling multiple sites or ongoing projects. You can compare quotes from different sellers before placing an order.

Safety Products