Fire extinguishers are key safety devices in case of fire. However, operating them or selecting the same requires prior knowledge. Maintenance of the fire extinguisher is also essential and even simple to learn. With the presence of the pull pin, operating handle, tamper seal and others, familiarity with the components aids in operating and maintaining the device effectively. To help you with this, here are the insights into fire extinguisher parts names and details, along with the maintenance tips.
Main Parts of a Fire Extinguisher
The fire extinguisher name of parts that aid in serving its purpose is as follows:
Cylinder
It is the container that holds the actual extinguishing agent under pressure. The general fire extinguisher parts is the main component designed for storage and are found in all types, including wet chemical fire extinguishers.
Pressure Gauge
It is positioned on the top of the cylinder and states the pressure of the extinguishing agent in the cylinder. The pressure reading indicates the usability status of the cylinder.
Operating Handle or Lever
It is the activating switch of every fire extinguisher, including the foam fire extinguisher. The lever needs to be squeezed or pressed to begin discharging the extinguishing agent. The operating handle is present on the top of the cylinder.
Safety Pin
Also known as a pull pin, it is an important component that prevents accidental discharge of the agent. It does so by being placed in the extinguisher through the operating handle. The pin must be removed to use the fire extinguisher.
Nozzle
It serves as the outlet for an extinguishing agent in the cylinder. The nozzle designs depend on the type of fire extinguisher and application.
Hose (if applicable)
If present, the hose adds directionality to the extinguishing agent being discharged. It also adds length, easing the spray of an agent at a specific place.
Label or Identification Tag
The fire extinguishers are of different types. Label or identification tag informs about the type, usage instructions and maintenance guidelines.
Extinguishing Agent
It is the main component that is filled inside the cylinder. It holds the property to extinguish the fire. The extinguishing agent can be of any type, including dry chemical powder, water, foam, carbon dioxide, or wet chemical.
Discharge Horn (if applicable)
The DCP fire extinguisher and others may also comprise a discharge horn. It offers the direction for gas flow.
Tamper Seal
The presence of a tamper seal is an indicator that the fire extinguisher hasn’t been used. It includes a plastic pin that prevents accidental removal of the pull pin. If the seal is broken, necessarily evaluate the extinguisher before using it.
Maintenance of Fire Extinguisher
The maintenance of the fire extinguisher requires adhering to the following points:
- Check for any physical damages to the fire extinguisher. It includes the presence of dents, rust, cracks on the extinguisher and obstruction or damage on the hose and nozzle.
- Ensure the presence of a pin and tamper seal while also checking the needle is pointed in the green ‘charged’ portion of the dial
- Necessarily get the extinguisher serviced once on an annual basis and ensure the date is mentioned after each servicing.
- The label must face out while mounting the fire extinguisher
- Weigh and clean the extinguisher
- Ensure wall mountings are tight and secure
Slightly vibrate the fire extinguisher by shaking or tapping with a rubber mallet to prevent the settling of the powder in the dry powder fire extinguisher.
Conclusion
Knowing a fire extinguisher with parts eases its usage. Further, its effectiveness and functionality depend on proper maintenance. While we have helped you in the same, do you have a functioning fire extinguisher? If not, we can provide the same at an affordable price.
Offering the products without compromising on quality, L&T-SuFin brings you a variety of fire extinguishers. Make a bulk purchase easily by requesting the quote specific to your order. Also, benefit from the intriguing discounts available for our customers.
FAQs
What are the five main parts of a fire extinguisher?
The five main parts of the fire extinguisher are tanks, valve assembly, hose or nozzle, extinguishing agent and propellant.
What are the 3 elements in a fire extinguisher?
The three elements that form the extinguishing agent are oxygen, fuel and heat.
Top Blogs
Top Products